Part Number
Definition:
A WASHER OF ANY PERIPHERAL SHAPE HAVING A CENTRALLY LOCATED HOLE. BOTH BEARING SURFACES ARE PARALLEL AND FLAT, BUT ONE OR BOTH OF THE BEARING SURFACES MUST BE BROKEN BY A COUNTERBORE, COUNTERSINK, OR SIMILARLY SHAPED RECESS. THE THICKNESS MUST NOT EXCEED 25 PER CENT OF THE OUTSIDE DIAMETER OR THE LARGEST OUTSIDE DIMENSION. THE MAXIMUM LIMIT OF THE TOLERANCE OR RANGE APPLIED TO THE THICKNESS AND/OR LARGEST OUTSIDE DIMENSION MUST BE USED TO DETERMINE COMPLIANCE. EXCLUDES WASHER, CONCAVE, RETAINER, PACKING, AND THRUST TYPE WASHERS. SEE ALSO SPACER, SLEEVE; AND SPACER, STEPPED.
CAGE Information
| Code | Company |
|---|---|
| 80064 | NAVAL SHIP SYSTEMS COMMAND |
Federal Supply Class
Title
NUTS AND WASHERS
Inclusions:
INCLUDES LOCKNUTS; EYE NUTS; PLAIN NUTS; CASTELLATED NUTS; WING NUTS; PLATE NUTS; PUSH ON NUTS; CONCAVE AND CONVEX WASHERS; FLAT WASHERS; KEYED WASHERS; LOCK WASHERS; SHOULDERED WASHERS; SPLIT WASHERS.
Exclusions:
EXCLUDES BEARING THRUST WASHERS (FSC 3120); SHIMS (FSC 5365); RING SPACERS (FSC 5365); PLATE SPACERS (FSC 5365); LOCK RINGS (FSC 5365).
Characteristics (Decoded)
| MRC | Requirements Statement | Clear Text Reply |
|---|---|---|
| FEAT | SPECIAL FEATURES | HEX PERIPHERAL SHAPE,3.875 IN. WIDTH ACROSS FLATS |
| AAUB | HOLE DIAMETER | 1.060 INCHES NOMINAL |
| CRSD | TOP RECESS ANGLE | 90.0 DEGREES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.380 INCHES NOMINAL |
| CSML | BOTTOM RECESS DIAMETER | 1.120 INCHES NOMINAL |
| CRKG | BOTTOM RECESS ANGLE | 90.0 DEGREES NOMINAL |
| MATT | MATERIAL | NICKEL ALLOY 400 OVERALL |
| CQJW | TOP RECESS DIAMETER | 1.120 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-N-281,CL A,FORM 1 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |